Harbour Quay Port Alberni - cam and wind sensor

Need help? Ask your questions here
Post Reply
jen-weather
Posts: 3
Joined: Tue Jul 23, 2019 2:36 pm

Harbour Quay Port Alberni - cam and wind sensor

Post by jen-weather »

On the webcam the wind is blowing hard from the west this afternoon, but your display for the wind measurement continually reads East. I'm confused.
User avatar
bwd
Developer
Developer
Posts: 1244
Joined: Tue May 13, 2003 8:57 am
Location: In a van down by the jetty
Has thanked: 36 times
Been thanked: 40 times
Contact:

Post by bwd »

From the map:
http://www.bigwavedave.ca/GoogleMaps/ma ... pos=island

I think the orientation of the inlet is more South to North, so South=inflow and North=outflow.

From the flags in the the webcam right now it looks like there are bent a bit from the E, so from looking I would guess the wind right now is from the SSE. Yes straight E is a bit strange - I adjusted the angle a bit so now it reads SE.
jen-weather
Posts: 3
Joined: Tue Jul 23, 2019 2:36 pm

Thanks

Post by jen-weather »

I was just looking in more detail at the orientation of the harbour in that stretch too and thinking ah this is why he calls the newbies kook. I may have asked a dumb question.

I can definitely see the southerly rather than west. West doesn't make sense either. It could be channeled along the higher elevation land to a SE direction at that particular point, but I suspect most of the harbour is getting southerly.
Post Reply